If two Jabra Speak 750 speakerphones are within a 4m/13ft range of each other, the Link button will be visible. To temporarily link the audio between them, tap the Link button on both speakerphones. To unlink the speakerphones, tap the Link button on one of the speakerphones. The link will be disconnected if you turn off or enter pairing mode on one of the speakerphones. The link does not automatically reconnect afterwards. You will need to manually reconnect using the same procedure as above.

Turn on and connect your device to your computer. Depending on your product, this could be by connecting the USB cable, Jabra Link Bluetooth adapter, or Jabra Link DECT adapter. 2. In Jabra Direct, select your device. If a firmware update is available, this will be indicated by an Update now button.

To reset the Jabra speakerphone, simultaneously press and hold (8 seconds) the Answer call button and the End call button until “Factory reset” is announced. Resetting the Jabra speakerphone clears the list of paired Bluetooth devices and also clears all personalised settings. After a factory reset, it is necessary to re-pair the Jabra speakerphone with your Bluetooth devices or Jabra Link Bluetooth adapter.

To pair an additional Jabra device with the Jabra Link Bluetooth adapter, or to re-pair a Jabra device with the Jabra Link Bluetooth adapter, follow these steps. 1. Insert the Jabra Link Bluetooth adapter into a USB port on your computer. 2. Ensure the Jabra Bluetooth device is turned on and within range. 3. Put the Jabra Bluetooth device in pairing mode (as you would do when pairing it with a mobile device). 4.Open Jabra Direct and click Pairing. 5.In Available Bluetooth devices, click Search. 6.Select the device to pair with the Jabra Link Bluetooth adapter, and then click Connect.

You can only link a Jabra Speak 750 with another Speak 750.